By PURPLELEC | 18 June 2024 | 0 Comments
How to scientifically maintain the video converter
Video converter is a professional electronic device, which needs to be connected to the power supply, and also connected to the video output device and the video display device. Scientific maintenance of the video converter is the key to prolonging its life.
Precautions for the use of audio and video converter:
1. System grounding, the system must have a perfect grounding, otherwise, it will not only cause signal interference, instability or mechanical damage, but also may cause personal accidents due to leakage. The final grounding point of the video converter should be connected to the true ground, and its grounding resistance should be less than 1.
2. It is forbidden to change the original design. It is forbidden to change or add any components to the mechanical and electrical design of this product. Otherwise, the manufacturer will not be responsible for the harmful consequences caused by this.
3. Ensure that the input voltage and current of the equipment are required by the composite video converter.
4. Some video converters have AC 220V high-voltage components. Please do not open the casing without authorization to avoid the risk of electric shock.
5. Do not place the system equipment in an overly cold or overheated place
6. The video converter will heat up when working, so keep the working environment well ventilated to avoid damage to the machine due to excessive temperature.
7. When it is rainy or wet or when not in use for a long time, the main power switch of the video converter should be turned off.
8. Before the following operations, the AC power cord of the device must be unplugged from the AC power supply socket: A. Remove or reinstall any part of the device; B. Disconnect or reconnect any electrical plug or other connection of the device.
9. Non-professionals should not attempt to disassemble the housing of the video converter without permission, and do not repair it privately to avoid accidents or aggravate the damage of the equipment.
10. Do not spill any chemicals or liquids on or near the device.
Leave a Reply
Your email address will not be published.Required fields are marked. *